The product has commutating and mixing functions, its interchangeable pressure and working interfaces for different fluid control functions such as mixing or dispersing medium. In some cases, it can replace two two-way globe valves. The valve is controlled by a pneumatic head to control the opening and closing of the valve.

 Sanitary Pneumatic 3-Way Angle Seat Valve Specifications:

 Sanitary Pneumatic 3-Way Angle Seat Valve Options:

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double acting—air to open, air to close

 Sanitary Pneumatic 3-Way Angle Seat Valve Applications:

• Foods
• Chemical industrial
• Sterilization machines
• Beer equipment
• Dry- cleaning machines

The post AV-5SPA3 Sanitary Pneumatic 3-Way Angle Seat Valve With Tri-Clamp Ends appeared first on Adamant Valves.

The valve positioner of the pneumatic proportional control angle seat valve receives a 4-20 mA current signal from the control system and converts it into a gas signal through the processor to control the valve opening. At the same time, the gas signal can be combined with the adjustment cone to achieve precise flow regulation of the valve.

 Sanitary Pneumatic Proportional Control Angle Seat Valve Specifications:

Sanitary Pneumatic Proportional Control Angle Seat Valve Options:

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double acting—air to open, air to close

Sanitary Pneumatic Proportional Control Angle Seat Valve Applications:

• Foods
• Beverage
• Water treatment plant
• Fluid mixing plant
• Vacuum technology

The post AV-5SPA Sanitary Pneumatic Proportional Control Angle Seat Valve With Threaded Ends appeared first on Adamant Valves.

The electric actuator of the electric proportional control angle seat valve receives a 4-20 mA or a 10-10V DC electric signal to regulate the valve opening and achieve precise flow regulation with the valve cone.

Sanitary Electric Proportional Control Angle Seat Valve Specifications:

Sanitary Electric Proportional Control Angle Seat Valve Options:

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double-acting—air to open, air to close

Sanitary Electric Proportional Control Angle Seat Valve Applications:

• Foods
• Beverage
• Water treatment plant
• Fluid mixing plant
• Vacuum technology

The post AV-5SEA Sanitary Electric Proportional Control Angle Seat Valve With Threaded Ends appeared first on Adamant Valves.

The operating principle of the angle seat valve is the same as the check valve. However, the Y-shaped valve body expands the flow cross-section of the valve chamber. This makes the fluid steadier and increases the flow rate by 30%.

Sanitary Manual Angle Seat Valves Specification

Sanitary Manual Angle Seat Valves Dimensions

Medium: water(20℃)

Sanitary Manual Angle Seat Valves Applications:

Sanitary Manual Angle Seat Valves are widely used in food and chemical processes, sterilization machines, high-pressure sterilizers, dry-cleaning machines, clothes dryers, and beer equipment, especially in steam piping systems and production lines.

The post AV-5SMA Sanitary Manual Angle Seat Valves appeared first on Adamant Valves.

AV-5AS pneumatic angle seat valve is a pneumatic valve. It is widely used in food and chemical processes, sterilization machines, high-pressure sterilizers, dry-cleaning machines, clothes dryers, and beer equipment, especially in steam piping systems and production lines.

Sanitary Pneumatic Angle Seat Valves Design Features

• Size: 1/2”-3”/ DN15-DN80
• Material: AISI 316 / AISI 304
• Connection: Thread, clamp, flange, BSP, BSPT, NPT, DIN, or other upon request.
• Working pressure: 8bar, 10bar
• Working temperature: 120℃, 180℃
• Valve plug and seal: Teflon (PTFE)

Sanitary Pneumatic Angle Seat Valves Working Principle

The operating principle of the AS angle seat valve is the same as the check valve. However, the Y-shaped valve body equipped with pneumatic actuator expands the flow cross-section of the valve chamber. This makes the fluid steadier and increases the flow rate by 30%. Meanwhile, the flow direction of the medium is changed, and the smaller pneumatic actuator can be equipped.

Dimensions (mm)

The post AV-5AS Sanitary Pneumatic Angle Seat Valves appeared first on Adamant Valves.