Call us now : 1 (949) 407 8897

Showing 1–9 of 247 results

AV-10 Sanitary Tank Bottom Valves

Materials Product wetted steel parts: AISI 316L/304 Other steel parts: AISI 304 FDA Seal: EPDM Optional: PTFE, all seals complying with FDA 21CFR177.2600. Technical Specification: Max. working pressure: 147psi (10bar) Control air pressure: 70-116 (5-8bar) Working temperature range: EPDM: 14° F to 248° F (-10°...

AV-10BM Sanitary Tank Bottom Diaphragm Valve, Manual Type

Technical Specification:          Size: 1”-4” DN25-DN100          Max. working pressure: 145psi (10bar)          Working temperature range: -4° F to 302° F (-20°C to 150°C)          Sterilization temperature: 302° F ( 150° C, MAX 20 min)          Finish: <32Ra (<0.8 µm) Other finishes available upon request

AV-10BP Sanitary Tank Bottom Diaphragm Valve

Technical Specification:          Size:1”-4” DN25-DN100          Max. pressure: 116psi (8bar)          Control air pressure: 70-116 (5-8bar)          Highest temperature range: Stainless steel actuator: -12° F to 302° F (-20°C to 150°C)          Plastic  actuator: -12° F to 266° F (-20°C to 130°C)...

AV-10MB Sanitary Tank Bottom Ball Valve With Tri-Clamp Ends, Manual Type

Specification: Size 1"-4"/DN25-DN100 Working pressure 0-10 bar (145psi) Outside surface Matte, light, sandblast and electronic polishing Body Material AISI 316L / AISI 304 Working temperature Stainless steel actuator: -12° F to 302° F (-20°C to 150°C) Plastic  actuator: -12° F to 266° F (-20°C to...

AV-10MCB Multi-channel Bottom Diaphragm Valve

Multi-channel bottom diaphragm valve MG-32B Size: 1"-2", DN25-DN50 Material: 316L/1.4404, 1.4435 NB2 Fe<5% Operations: Manual/Pneumatic Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

AV-10PB Sanitary Tank Bottom Ball Valve With Tri-Clamp Ends, Pneumatic Type

Specification: Size 1"-4"/DN25-DN100 Working pressure 0-10 bar (145psi) Outside surface Matte, light, sandblast and electronic polishing Body Material AISI 316L / AISI 304 Working temperature Stainless steel actuator: -12° F to 302° F (-20°C to 150°C) Plastic  actuator: -12° F to 266° F (-20°C to...

AV-10PD Sanitary Pneumatic 2-way Double Seat Mix Proof Valve with Welded End

Specifications Size 1.5”-4”, DN40-DN100 Working temperature -10 °C ~130 °C Working pressure 0-10 bar Body material 304,316L Sealing material Viton, Silicone Connection Butt-welded, sanitary clamp, threaded, flange, DIN, SMS, RJT, IDF, or others upon request. Finishing <32Ra (<0.8µm); Other finishes available upon request.

AV-10PT Powder Tank Bottom Butterfly Valve

Specifications: 4''-10'', DN100-DN250 Connection method: clamp, welding, flange, bottom flange, DIN 3A INCH Material: 316L/1.4404/1.4435 Seal: White SILCON (recommended) Gray FKM (selection) Execution mode: manual, pneumatic, electric interchangeable

AV-10TB Tank Bottom Valve

Features: Complete discharge system avoided retention. Normally closed valve(closed by spring)-standard version. Normally open valve(opened by spring)by a 180 degree rotating of the pneumatic actuator. 360° adjustable body, even after welding the flange to the tank. Easy maintenance and low maintenance cost by tri-clamp. FDA-approved...